How do I use mains water on shift?
  • 13 Oct 2022
  • 1 Minute to read
  • Contributors
  • Dark
    Light
  • PDF

How do I use mains water on shift?

  • Dark
    Light
  • PDF

Summary

The following guide provides instructions on how to operate an Orange Sky vehicle using a mains water supply. Using mains water means that the van is plugged in to a clean water tap and is not using the on-board water tanks.


1. Power up the van using whichever method is appropriate for the site (generator or 3-phase power).

2. Un-reel the hose and run it to the allocated clean water tap at the shift location.

3. Turn on the tap to full flow and squeeze the hose to ensure that adequate pressure has built in the hose.

4. No further control switches need to be activated as water is now being supplied directly to the washing machines.

**Only turn on the SYSTEM or CONTROL switch if you would like to fill the clean tank at the same time as running the washers. Only turn on the CLEAN/TANK switch if you are not plugged in to mains water and would like to operate using on-board water tanks.


For further assistance, please call service support.



Was this article helpful?